Weicon Flex 310 M Stainless Steel is a specialised variant on our Weicon Flex 310 M elastic adhesive. This grade has been designed for maximum compatibility with stainless steel, aluminium and other non-ferrous metals and is a non-corrosive adhesive with high bonding strength.
Weicon Flex 310 M Stainless Steel is used for adhesive bonding and the sealing of seams and joints on metal components and equipment. It is also used wherever an adhesive is required that must be colour matched to the surrounding material.
Typical Characteristics
Density | 1.06 g/cm³ |
Viscosity | Pasty |
Stability (ASTM D 2202) | <1mm |
Processing Temperature | +5ºC to +35ºC |
Cure Type | Humidity |
Curing Conditions | +5ºC to +40ºC 30% to 95% rel. humidity |
Skin Over Time | 10 min. |
Cure Speed (first 24hrs) | 2-3mm |
Max Gap Filling | 5mm |
Overpaintable | Wet in Wet Within 3 hours of use |
Temperature Resistance | -40ºC to +90ºC |
Max Movement Capacity | 20% |
Building Material Category DIN 4102 |
B 2 |
Available Sizes
Weicon Flex 310 M Stainless Steel is available from Associated Gaskets in 290ml cartridges. These can be dispensed using standard cartridge guns.
Surface Preparation
Before applying Flex 310 M Stainless Steel it is critical to ensure that the surfaces being bonded are clean and grease-free. Many surface contaminants (such as oil, dust and dirt) can be removed with Weicon Surface Cleaner. For heavily soiled surfaces Weicon Cleaner S may be more suitable. If paint or adhesive residues must be removed, Weicon Sealant and Adhesive Remover Spray is likely an option.
For more information on surface preparation or working with this high quality elastic adhesive, please consult the relevant TDS and SDS which can be obtained by contacting your local Associated Gaskets branch.
Adhesive Finder Tool
Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!