Flex 310 M HT 200 is a high temperature resistant grade of elastic adhesive designed specifically for bonding parts that will be subjected to elevated thermal stress. This one part adhesive is manufactured from a MS polymer base and bonds well to most materials.
Once fully cured, parts bonded with Weicon Flex 310 M HT 200 can be powder coated.
Typical Characteristics
| Density | 1.41 g/cm³ |
| Viscosity | Pasty |
| Colour | Grey |
| Stability (ASTM D 2202) | <1mm |
| Processing Temperature | +5ºC to +35ºC |
| Cure Type | Humidity |
| Curing Conditions | +5ºC to +40ºC 30% to 95% rel. humidity |
| Skin Over Time | 10 min. |
| Cure Speed (first 24hrs) | 3-4mm |
| Overpaintable | Wet in Wet Within 3hrs of application |
| Long-Term Temperature Resistance |
-40ºC to +90ºC |
| Short-Term (45 min.) Temperature Resistance |
180ºC |
| Short-Term (30 min.) Temperature Resistance |
200ºC |
| Thermal Coating / Powder Coating |
After Complete Cure |
| Building Material Category DIN 4102 |
B 2 |
Available Sizes
Weicon Flex 310 M HT 200 is available from Associated Gaskets in 310ml cartridges. These can be dispensed using standard cartridge guns.
Surface Preparation
Before applying Flex 310 M HT 200 it is critical to ensure that the surfaces being bonded are clean and grease-free. Many surface contaminants (such as oil, dust and dirt) can be removed with Weicon Surface Cleaner. For heavily soiled surfaces Weicon Cleaner S may be more suitable. If paint or adhesive residues must be removed, Weicon Sealant and Adhesive Remover Spray is likely an option.
For more information on surface preparation or working with this high quality elastic adhesive, please consult the relevant TDS and SDS which can be obtained by contacting your local Associated Gaskets branch.
Adhesive Finder Tool
Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!
Additional Information and Resources
