Weicon Casting Resin MS 1000 is a specialised product designed for creating high quality castings and mouldings. This versatile product is manufactured from pure, unfilled epoxy resin and is liquid in nature. Weicon Casting Resin MS 1000 can be filled with a variety of different filler materials (e.g. pulverised, fibrous or textural) and can even be dyed depending on the requirements of your application.
Typical Characteristics
| Composition | Epoxy Resin |
| Mixing Ratio (% Weight) Resin/Hardener |
10:2 |
| Pot Life (200gm @ 20ºC) | 20 Min. |
| Density of the Mixture | 1.1 g/cm³ |
| Viscosity of the Mixture | 1,300 MPa |
| Max. Layer Thickness (per application) |
10mm |
| Cure Time before Mechanical Loads |
24 Hours |
| Fully Cured | 36 Hours |
| Mean Compressive Strength 25ºC acc. DIN 53281-83 |
60 MPa |
| Mean Tensile Strength 25ºC acc. DIN 53281-83 |
25 MPa |
| Mean Flexural Strength 25ºC acc. DIN 53281-83 |
285 Mpa |
| Mean Strength E-Modul 25ºC acc. DIN 53281-83 |
17,000 – 18,000 MPa |
| Shore D Hardness 25ºC acc. DIN 53281-83 |
65 |
| Shrinkage | 0.02% |
| Thermoforming Resistance | 50ºC |
| Dielectric Strength IEC 60.243 |
14 kV/mm |
| Electrical Resistance IEC 60.093 |
10¹⁶ Ω / cm |
| Colour | Transparent (Slight Inherent Colour) |
| Temperature Resistance | -35ºC to +120ºC |
Available Sizes
Weicon Casting Resin MS 1000 is available from Associated Gaskets in 1kg kits. These kits contain both hardener and activator in the correct proportions as well as a mixing spatula and disposable plastic gloves.
For more information on the best methods of surface preparation, processing guidelines or application suitability please don’t hesitate to contact your local Associated Gaskets branch. More information is also available in the attached brochure with details on the entire Weicon range of Plastic Metal Repair Compounds available from AG.
Adhesive Finder Tool
Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!
Additional Information and Resources
