Associated Gaskets

Associated Gaskets

1300 098 060

Call us

6 Locations Around Australia

Get contact information for your local branch

Weicon Plastic Metal ST

Material AG000220S01 Category

Weicon Plastic Metal ST

This two part component has a pasty consistency and is made from metal filled epoxy resin.

Specifically designed for use on stainless steel parts and is non-corrosive.

Weicon Plastic Metal ST is a specialised grade of plastic metal that is easy to use and sets hard. This two part component has a pasty consistency and is made from metal filled epoxy resin. Weicon Plastic Metal ST is specifically designed for use on stainless steel parts and is non-corrosive.

Plastic Metal ST can be applied in layers up to 10mm thick and will be cured enough to handle mechanical loads in approximately 9 hours (full cure will take about 12 hours). This high quality repair compound cures with very little shrinkage (0.02%).

Because of its excellent adhesion, non-corrosive nature and long lasting performance, Weicon Plastic Metal ST is used in a variety of applications. These include:

  • Repairs to Stainless Steel Parts and Components
  • Patching of Stainless Steel Tanks and Piping
  • Repairs to Stainless Steel Containers, Funnels and Flanges.

Once completely cured, Weicon Plastic Metal ST sets hard. Tests conducted in accordance with DIN 53281-83 requirements found that fully cured Plastic Metal SD had a hardness of 80 Shore D, a compressive strength of 80 MPa and a mean tensile strength of 27 MPa.

This grade of plastic metal is grey in coloured once cured and is used in applications where temperatures are between -35ºC and 120ºC.

Available Sizes

Weicon Plastic Metal ST is available in two different size kits from AG: 0.5kg and 2kg. Both sizes contain the correct proportions of resin and activator as well as a pair of disposable gloves, instructions and a plastic mixing and application spatula.

To make mixing simple and easy, extra space has been left in the resin container so that the activator can be added and mixed.

For more information on the best methods of surface preparation, processing guidelines or application suitability please don’t hesitate to contact your local Associated Gaskets branch. More information is also available in the attached brochure with details on the entire Weicon range of Plastic Metal Repair Compounds available from AG.

Adhesive Finder Tool

Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!

Additional Information and Resources

TDS Icon
Weicon Plastic Metal ST TDS
SDS Icon
Weicon Plastic Metal ST SDS Hardener
SDS Icon
Weicon Plastic Metal ST SDS Resin
Brand

Any Approvals for Water / Food

Dangerous Goods for Transport

Colour

Max. Continuous Temp.

100% Cure

Flexural Strength

Adhesive Type

Hardness