Weicon Contact Adhesive VA 110 is a high quality, one-part, cold curing glue approved for use in sensitive applications. Part of the larger and comprehensive range of Weicon Contact Adhesives, VA 110 is certified in accordance with NSF/ANSI Standard 61 for use in drinking water systems.
VA 110 is ideal for bonding rubber and plastic components but also exhibits good adhesion when used with Metal, EPDM, Wood, Balsa Wood, Glass and Leather (amongst others).
Clear in colour, Weicon Contact Adhesive VA 110 has a medium viscosity (70-110 mPa) and is fast curing.
|Nature||Colourless, Clear Liquid|
|Viscosity at 20ºC Brookfield||70-110 mPa|
|Maximum Gap Covering||0.15mm|
|Initial Adhesion on Aluminium||20-50 seconds|
|Initial Adhesion on Nora Test Rubber||3-15 seconds|
|Initial Adhesion on Rigid PVC||10-50 seconds|
|Final Strength Achieved After||24 hours|
|Long-Term Temperature Resistance||-30ºC to +80ºC (approx.)|
|Short-Term Temperature Resistance||+100ºC (approx.)|
As part of the Ethyl Ester group of Weicon Contact Adhesives, VA 110 polymerises by reacting with moisture on both the bonding surface and from the air before curing under light pressure.
If used for bonding plastics with particularly adhesive averse surfaces (e.g. polyolefines, PTFE) the surface should be pre-treated with Weicon Contact Adhesive Primer for Polyolefines. Failure to do so will means that the Contact Adhesive cannot anchor itself to the plastic and a strong bond will be unable to form. It is suggested that users familiarise themselves with the TDS for this product before use.
Weicon Contact Adhesive VA 110 is available from AG in a variety of sizes containers that are listed below. Of these, the 12gm, 30gm and 60gm bottles all make use of Weicon’s specially designed and proprietary Pen System which allows for excellent accuracy and reduced wastage during application.
Adhesive Finder Tool
Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!