Associated Gaskets

Associated Gaskets

1300 098 060

Call us

6 Locations Around Australia

Get contact information for your local branch

Weicon GMK 2410 Rubber Metal Adhesive

Material AG000053S01 Category Tags ,

Weicon GMK 2410 Rubber Metal Adhesive

A strong, one-part adhesive specifically designed for bonding rubber to metal and rubber to rubber.

This high quality adhesive achieves initial adhesion in around 10 minutes, full cure in about 24 hours, has a high bond strength.

Weicon GMK 2410 is a strong, one-part adhesive specifically designed for bonding rubber to metal and rubber to rubber. Based on polychloroprene (CR), this high quality adhesive is fast acting (achieves initial adhesion in around 10 minutes, full cure in about 24 hours), has a high bond strength and resists humidity.

Though designed specifically for rubber and metals, Weicon GMK 2410 Rubber Metal Adhesive also exhibits good results when used to bond leathers, felts, insulating materials, textiles, woods and many plastics thus making it a very versatile solution for a wide range of bonding applications. Once fully cured, GMK 2410 resists temperatures between -40ºC and 80ºC (with short-term spikes up to 100ºC).

Available in a range of sizes and styles (listed below), Weicon GMK 2410 Rubber Metal Adhesive is yellowish-brown in colour. Though this usually varies depending on the preferences of the user, usual consumption of Weicon GMK 2410 is around 250 – 350 g/m².

Available Sizes
  • 185gm Tubes
  • 300gm Cans
  • 350gm Brush Top Cans
  • 700gm Can
  • 5kg Bucket
  • 25kg Bucket
Surface Preparation

The surfaces being bonded must be clean, dry and free of dust or grease (Weicon Surface Cleaner is ideal for this). Roughening smooth surfaces will significantly increase the bonding strength achieved.

Processing

Stir Weicon GMK2410 Rubber Metal Adhesive Prior to use. Then, apply a thin, even layer of the adhesive onto both surfaces using a brush or spatula. Let it dry for about 5-10 minutes depending on layer thickness, temperature and humidity. For absorbing surfaces (e.g. felt) a second adhesive layer should be applied once the first ahs dried.

As soon as the surfaces are dry but still a little bit tacky the parts should be joined and pressed using a strong pressure for a short period. Once the evaporation time has passed the adhesive must be applied again.

Non-cured excessive adhesive can be easily removed with Weicon Surface Cleaner.

Please note that this information is general in nature and not intended as specific instructions for any particular application. It is strongly suggested that users familiarise themselves with the SDS for this product prior to use.

Adhesive Finder Tool

Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!

Additional Information and Resources

PIS Icon
Weicon GMK 2410 Rubber Metal Adhesive Info Sheet
TDS Icon
Weicon GMK 2410 Rubber Metal Adhesive TDS
SDS Icon
Weicon GMK 2410 Rubber Metal Adhesive SDS
Colour

Max. Continuous Temp.

Min. Continuous Temp.

Short Term Max. Temp.

One or Two Part Glue

Bonding Metals

Bonding Wood & Timbers

Bonding (most) Rubber

Bonding Stone & Brick

Bonding Fibre Reinforced Materials

Dangerous Goods for Transport

100% Cure

Viscosity

Brand