Weiconlock AN 306-38 Cylindrical Assembly Sealer is a specialised anaerobic adhesive designed to cure quickly. This high quality adhesive is used to permanently lock and seal cylindrical assemblies such as bearings, gear wheels and bolts.
Weiconlock AN 306-38 Cylindrical Assembly Sealer is green in colour and has a very fast cure time. It is used in environments where temperatures may be as low as -60ºC or as high as 150ºC.
Technical Details
| Colour | Green |
| For Threaded Joints Up To | M 36 |
| Viscosity at 25ºC Brookfield | 2,500 mPa |
| Gap filling capacity (max.) | 0.2mm |
| Breakaway Strength (Thread) | 35 – 45 Nm |
| Prevailing Strength (Thread) | 50 – 70 Nm |
| Shear Strength (DIN 54452) | 25 – 30 N/mm² |
| Handling Strength at Room Temp. | 5 min. (approx.) |
| Final Strength at Room Temp. | 1 – 3 Hours |
| Temperature Resistance | -60ºC to +150ºC |
Available Sizes
Weiconlock AN 306-38 Cylindrical Assembly Sealer is available from your local Associated Gaskets branch in 10ml, 20ml, 50ml or 200ml bottles. These special pen shaped bottle allow for easy, accurate application while the base minimises the chances of any spillage.
Surface Preparation
In most applications, Weiconlock AN 306-38 Cylindrical Assembly Sealer does not require pre-treatment of the surface as even slightly oily surfaces cab still be adhered. That being said, best results will be achieved on cleaned and degreased surfaces (Weicon Surface Cleaner is ideal for this task). If required the parts should be slightly roughened.
Processing
Weiconlock AN 306-38 is ready to use from the moment you open the bottle. It should be evenly applied direct from the bottle/tube with the dispensing tip (avoid direct contact between the dispensing tip and metal). Weiconlock AN 306-38 should be applied evenly around the thread.
Do not pour any excess Weiconlock fluid that has made contact with metal back into the bottle. Even the smallest metal particles will cause the contents of the bottle to cure once the lid is re-closed. In series construction or production line situations, the use of manual or automatic applicators is suggested. For full use instructions, please consult the TDS & SDS for this product (both of which can be provided by your local AG branch).
Adhesive Finder Tool
Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!
