Associated Gaskets

Associated Gaskets

1300 098 060

Call us

6 Locations Around Australia

Get contact information for your local branch

Weiconlock AN 302-41 Threadlocker

Material AG000472S01 Category

Weiconlock AN 302-41 Threadlocker

A low viscosity, medium strength grade designed for threadlocking applications.

This high quality anaerobic adhesive is vibration proof and designed for the permanent locking and sealing of small size threads.

AN 302-41 is a low viscosity, medium strength grade designed for threadlocking applications. This high quality grade of anaerobic adhesive is vibration proof and specifically designed for the permanent locking and sealing of small size threads. Once a threaded connection is sealed with AN 302-41 it can be easily disassembled with normal tools.

Technical Details
Colour Blue
For Threaded Joints Up To M 12
Viscosity at 25ºC Brookfield 125 mPa·s
Gap filling capacity (max.) 0.1mm
Breakaway Strength (Thread) 10 – 15 Nm
Prevailing Strength (Thread) 12 – 16 Nm
Shear Strength (DIN 54452) 8 – 12 N/mm²
Handling Strength at Room Temp. 10 – 20 min.
Final Strength at Room Temp. 3 Hours (approx.)
Temperature Resistance -60ºC to +150ºC
Available Sizes

Weiconlock AN 302-41 Anaerobic Adhesive is available from your local AG in 20ml, 50ml or 200ml bottles. These special pen shaped bottle allow for easy, accurate application while the base minimises the chances of any spillage.

Surface Preparation

Generally speaking, Weiconlock AN 302-41 does not require pre-treatment of the surface as even slightly oily surfaces cab still be adhered. That being said, best results will be achieved on cleaned and degreased surfaces (Weicon Surface Cleaner is ideal for this task). If required the parts should be slightly roughened.

Processing

Weiconlock AN 302-41 is ready to use from the moment you open the bottle. It should be evenly applied direct from the bottle/tube with the dispensing tip (avoid direct contact between the dispensing tip and metal). Weiconlock AN 302-41 should be applied evenly around the thread of the screw or bolt.

Do not pour any excess Weiconlock fluid that has made contact with metal back into the bottle. Even the smallest metal particles will cause the contents of the bottle to cure once the lid is re-closed. In series construction or production line situations, the use of manual or automatic applicators is suggested. For full use instructions, please consult the TDS & SDS for this product (both of which can be provided by your local AG branch).

Additional Information and Resources

TDS Icon
Weiconlock AN 302-41 Threadlocker TDS
SDS Icon
Weiconlock AN 302-41 SDS
Video Icon
Weiconlock AN 302-41 Product Video
SDS Icon
Weiconlock Adhesives Brochure
Adhesive Finder Tool

Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!

Colour

Max. Continuous Temp.

Min. Continuous Temp.

One or Two Part Glue

Threadlocker Viscosity

Threadlocker Strength

For Threaded Joints Up To…

Max. Gap Filling Capacity

100% Cure

Viscosity

Any Approvals for Water / Food

Approved for Gas

Approved for Oxygen Sealing

Dangerous Goods for Transport

Brand