Associated Gaskets

Associated Gaskets

1300 098 060

Call us

6 Locations Around Australia

Get contact information for your local branch

Weiconlock AN 305-67 Pipe, Thread and Flange Sealer

Weiconlock AN 305-67 Pipe, Thread and Flange Sealer

A versatile grade of anaerobic adhesive that can be used for sealing pipes, threaded connections or as a liquid gasket in metallic flange connections.

White in colour, it has a high viscosity which allows it to be accurately applied to threads up to M80 or complex flange facings.

Weiconlock AN 305-67 is a versatile grade of anaerobic adhesive that can be used for sealing pipes, threaded connections or as a liquid gasket in metallic flange connections. This grade is white in colour and has a high viscosity which allows it to be accurately applied to small threads or complex flange facings.

Weiconlock AN 305-67 Pipe, Thread and Flange Sealer creates low bond strength (but permanent) connections that can be disassembled when maintenance is required.

Technical Details
Colour White
For Threaded Joints Up To M 80
Viscosity at 25ºC Brookfield 170,000 – 410,000 mPa
Gap filling capacity (max.) 0.6mm
Breakaway Strength (Thread) 3 – 5 Nm
Prevailing Strength (Thread) 2 – 4 Nm
Shear Strength (DIN 54452) 6 – 8 N/mm²
Handling Strength at Room Temp. 120-240 min. (approx.)
Final Strength at Room Temp. 24 – 72 Hours (approx.)
Temperature Resistance -50ºC to +175ºC
Available Sizes

Weiconlock AN 305-67 Pipe, Thread and Flange Sealing Adhesive is available from your local Associated Gaskets branch in 50ml or 200ml bottles. These special pen shaped bottle allow for easy, accurate application while the base minimises the chances of any spillage.

Surface Preparation

In most applications, Weiconlock AN 305-67 Pipe, Thread and Flange Sealer does not require pre-treatment of the surface as even slightly oily surfaces cab still be adhered. That being said, best results will be achieved on cleaned and degreased surfaces (Weicon Surface Cleaner is ideal for this task). If required the parts should be slightly roughened.

Processing

Weiconlock AN 305-67 is ready to use from the moment you open the bottle. It should be evenly applied direct from the bottle/tube with the dispensing tip (avoid direct contact between the dispensing tip and metal). Weiconlock AN 305-67 should be applied evenly around the thread or flange surface.

Do not pour any excess Weiconlock fluid that has made contact with metal back into the bottle. Even the smallest metal particles will cause the contents of the bottle to cure once the lid is re-closed. In series construction or production line situations, the use of manual or automatic applicators is suggested. For full use instructions, please consult the TDS & SDS for this product (both of which can be provided by your local AG branch).

Adhesive Finder Tool

Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!

Colour

Max. Continuous Temp.

Min. Continuous Temp.

One or Two Part Glue

Threadlocker Viscosity

Threadlocker Strength

For Threaded Joints Up To…

Max. Gap Filling Capacity

100% Cure

Viscosity

Any Approvals for Water / Food

Approved for Gas

Approved for Oxygen Sealing

Dangerous Goods for Transport

Brand