Associated Gaskets

Associated Gaskets

1300 098 060

Call us

6 Locations Around Australia

Get contact information for your local branch

Weicon Plastic Metal WR2

Material AG000225S01 Category

Weicon Plastic Metal WR2

A high strength, mineral-filled epoxy resin putty with outstanding wear resistant properties.

This putty is typically used for repairs or protective coatings in situations where a castable compound cannot be used.

Typical applications include repairs to conveyors, guides and slide ways, and for preventing wear on metal surfaces that are exposed to extreme abrasion and erosion.

 

Weicon Plastic Metal WR2 is a high strength, mineral-filled epoxy resin putty with outstanding wear resistant properties. This putty is typically used for repairs or protective coatings in situations where a castable compound (such as our Weicon Plastic Metal WR) cannot be used. Typical applications include:

  • Repairs to conveyors, guides and slide ways
  • Where rolling or sliding movements cause wear
  • Preventing wear on metal surfaces that are exposed to extreme abrasion and erosion
  • As a wear resistant under-coating ahead of Weicon Plastic Metal Ceramic BL

Weicon Plastic Metal WR2 can be applied in layers up to 10mm in thickness and cures with very little shrinkage (0.025%). Pot life at 20ºC is about 45 minutes and, though it has a 100:25 mix ratio (resin : hardener), mixing is easy because the kit is supplied with the correct mixing proportions; simply pour all of the hardener into the resin container and mix thoroughly.

Weicon Plastic Metal WR2 will cure to the point of handling mechanical loads in approximately 16 hours and achieve final hardness in about 24 hours (depending on curing environment). Once fully cured, this high quality product will exhibit good compressive strength (71 MPA at 25ºC according to DIN 53281-83) and hard a Shore D hardness of 82 (again, at 25ºC according to DIN 53281-83).

Plastic Metal WR has good sliding properties and withstands exposure to temperatures between -35ºC and 120ºC and is dark grey in colour.

Available Sizes

Weicon Plastic Metal WR2 is available in two different size kits from Associated Gaskets: 0.5kg and 2kg. Both contain the correct quantities of resin and activator as well as a pair of disposable gloves, instructions and a plastic mixing spatula.

To make mixing simple and easy extra space has been left in the resin container so that the activator can be added and mixed.

For more information on the best methods of surface preparation, processing guidelines or application suitability please don’t hesitate to contact your local Associated Gaskets branch. More information is also available in the attached brochure with details on the entire Weicon range of Plastic Metal Repair Compounds available from AG.

Adhesive Finder Tool

Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!

Additional Information and Resources

TDS Icon
Weicon Plastic Metal WR2 TDS
SDS Icon
Weicon Plastic Metal WR2 SDS Hardener
SDS Icon
Weicon Plastic Metal WR2 SDS Resin
Brand

Any Approvals for Water / Food

Dangerous Goods for Transport

Colour

Max. Continuous Temp.

100% Cure

Flexural Strength

Adhesive Type

Hardness