Associated Gaskets

Associated Gaskets

1300 098 060

Call us

6 Locations Around Australia

Get contact information for your local branch

Weicon Plastic Metal WP

Material AG000223S01 Category

Weicon Plastic Metal WP

A specialised two-part compound designed to provide outstanding chemical, wear and abrasion resistance and has a paste like consistency that wont sag.

Produced from ceramic filled epoxy resin, it is commonly used to replace wear resistant alloys, ceramic tiles and rubber linings, as well as welded metal coatings.

Due to its good residual elasticity and impact strength, its commonly used for a wide range of repairs and coating applications.

Weicon Plastic Metal WP is a specialised two-part compound designed to provide outstanding wear and abrasion resistance. Produced from ceramic filled epoxy resin, Weicon Plastic Metal WP has a pasty consistency and does not sag.

This high quality grade is specifically designed to provide long lasting wear protection and can be used to replace wear resistant alloys, ceramic tiles and rubber linings as well as welded metal coatings.

Typical Characteristics and advantages of Weicon Metal WP include:

  • Extremely high resistance to abrasion and wear.
  • High strength
  • Very good chemical resistance
  • Economical
  • Good residual elasticity and impact resistance

Given its versatility, Weicon Plastic Metal WP is used in a wide variety of repair and protective coating applications. Examples include:

  • Slides, chutes and container linings and repairs
  • Pump linings and repairs
  • Worm housing and spiral conveyors lining
  • Coating of friction plates
  • Wood chip and transport blowing machines
  • Pulverisation plants
  • Lining of centrifuges and separators
  • Dust filler systems
  • Ash filler systems
  • Lining and protection in ventilation fan systems

Weicon Plastic Metal WP can be applied in layers up to 10mm thick and cures with very little shrinkage (0.02%). Pot life for 200gm at 20ºC is about 30 minutes. This highly viscous putty has a 1:1 mix ratio and to make things simple, extra space has been left in the resin container so the entire contents of the hardener container can be added and thoroughly mixed.

Weicon Plastic Metal WP will cure to the point where it can handle mechanical loads in about 16 hours and achieve final hardness after around 96 hours (or 4 days). Once fulloy cured, this tough, long lasting wear resistant compound will be grey in colour and have a Shore D hardness of 80 (according to DIN 53281-83).

Cured Plastic Metal WP withstands temperatures between -35ºC and 120ºC and has a mean compressive strength of 51 MPa (measured at 25ºC according to DIN 53281-83).

Available Sizes

Weicon Plastic Metal WP is available in either 2kg or 10kg kits from your local Associated Gaskets. Both kit sizes contain both hardener and activator in the correct proportions as well as a mixing spatula and disposable plastic gloves.

For more information on the best methods of surface preparation, processing guidelines or application suitability please don’t hesitate to contact your local Associated Gaskets branch. More information is also available in the attached brochure with details on the entire Weicon range of Plastic Metal Repair Compounds available from AG.

Adhesive Finder Tool

Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!

Additional Information and Resources

TDS Icon
Weicon Plastic Metal WP TDS
SDS Icon
Weicon Plastic Metal WP SDS Hardener
SDS Icon
Weicon Plastic Metal WP SDS Resin
Brand

Any Approvals for Water / Food

Dangerous Goods for Transport

Colour

Max. Continuous Temp.

100% Cure

Flexural Strength

Adhesive Type

Hardness