Associated Gaskets

Associated Gaskets

1300 098 060

Call us

6 Locations Around Australia

Get contact information for your local branch

Weicon Adhesive Spray

Material AG000354S01 Category

Weicon Adhesive Spray

This grade of spray adhesive has an evaporation time of about 5 to 15 minutes and a maximum working time of 30 minutes.

It is used for bonding a wide variety of materials such as leather, textiles, cardboard and wood, among others.

Weicon Adhesive Spray is a universal form of spray-adhesive that can be used to bond lightweight materials to themselves and among each other. Very easy to use, Weicon Adhesive Spray is used for bonding a wide variety of material types. These include:

  • Paper
  • Cardboard
  • Plasterboard
  • Wood
  • Thin Veneers
  • Cork
  • Leather
  • Textiles
  • Felt
  • Soft Foam
  • Rubber
  • Sponge Rubber
  • Plastic Film (except for PVC & polyethylene)
  • Hard Foam (e.g. polystyrene)

Based on synthetic rubber, Weicon Adhesive Spray has an evaporation time of about 5 to 15 minutes and a maximum working time of 30 minutes. Once applied and cured, Weicon Adhesive Spray withstands exposure to temperatures between -20ºC and 65ºC.

Each can of this economical grade of adhesive spray can be used to cover an area approximately 4mtrs² in size.

Available Sizes

Weicon Adhesive Spray is available from Associated Gaskets in 500ml aerosol cans.

In addition to this grade AG is also pleased to offer the following two related products from this high quality German manufacturer:

Weicon Adhesive Spray – Extra Strong
Weicon Adhesive Spray for Detachable Joints


Before use, ensure surfaces are clean, dry and free of grease. Shake the can of Weicon Adhesive Spray and spray on one surface from a distance of between 15cm – 30cm. If bonding porous materials the adhesive should be applied to both surfaces.

Depending on surfaces characteristics and ambient temperature the spray should be allowed to dry for between 1 & 15 minutes or until the adhesive is no longer stringy. Once this is done position the parts and join them with strong pressure.

Please note that these are general guidelines only and do not take into account all potential factors present in a specific application. It is strongly suggested that potential users familiarise themselves with the SDS for this product prior to use.

Additional Information and Resources

PIS Icon
Weicon Adhesive Spray Info Sheet
Adhesive Finder Tool

Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!


Max. Continuous Temp.

Min. Continuous Temp.

Any Approvals for Water / Food

Dangerous Goods for Transport