Associated Gaskets

Associated Gaskets

1300 098 060

Call us

6 Locations Around Australia

Get contact information for your local branch

Weicon Adhesive Spray – Extra Strong

Material AG000226S01 Category

Weicon Adhesive Spray – Extra Strong

A high quality grade of spray adhesive that was specially formulated to create a strong, permanent bond on rough or uneven surfaces.

Based on a synthetic rubber adhesive, it has an evaporation time of around 5 to 10 minutes and a maximum working time of 45 minutes.

Will bond to a wide range of materials including rubber, leather, felt, foams, vinyl, sponge, metals and wood and many others.

 

Weicon Adhesive Spray – Extra Strong is a high quality grade of spray adhesive specially formulated for maximum bonding strength. This grade of adhesive spray is particularly useful for creating strong, permanent bonds on rough or uneven surfaces. Very easy to use; every can of Weicon Adhesive Spray – Extra Strong features a special spray valve that allows the quantity of adhesive spray to be infinitely adjusted.

Examples of materials that can be bonded by Weicon Adhesive Spray – Extra Strong include:

  • Felt
  • PVC Foil
  • Genuine and Imitation Leather
  • Carpets
  • Plastics
  • Paper
  • Rubber
  • Sponge Rubber
  • Insulating Materials
  • Foam Plastics
  • Vinyl
  • Metal
  • Wood

Weicon Adhesive Spray – Extra Strong is based on a synthetic rubber adhesive and has an evaporation time of around 5 to 10 minutes. Maximum working time for this grade is 45 minutes.

Once fully cured, Weicon Adhesive Spray – Extra Strong withstands temperatures between -20ºC and 80ºC. This economical spray can be used to cover an area of approximately 4m² (depending on the amount applied).

Available Sizes

Weicon Adhesive Spray – Extra Strong is available from Associated Gaskets in 500ml aerosol cans.

In addition to this grade AG is also pleased to offer the following two related products from this high quality German manufacturer:

Weicon Adhesive Spray (Standard)
&
Weicon Adhesive Spray for Detachable Joints

Processing

Before use, ensure surfaces are clean, dry and free of grease. Shake the can of Weicon Adhesive Spray and spray on one surface from a distance of between 15cm – 30cm. If bonding porous materials the adhesive should be applied to both surfaces.

Depending on surfaces characteristics and ambient temperature the spray should be allowed to dry for between 5 & 15 minutes or until the adhesive is no longer stringy. Once this is done position the parts and join them with strong pressure.

Please note that these are general guidelines only and do not take into account all potential factors present in a specific application. It is strongly suggested that potential users familiarise themselves with the SDS for this product prior to use.

Adhesive Finder Tool

Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!

Colour

Max. Continuous Temp.

Min. Continuous Temp.

Any Approvals for Water / Food

Dangerous Goods for Transport

Brand