Associated Gaskets

Associated Gaskets

1300 098 060

Call us

6 Locations Around Australia

Get contact information for your local branch

Weicon Urethane 45

Material AG000340S01 Category

Weicon Urethane 45

Weicon Urethane 45 is a softer grade in the Weicon Urethane range which, once cured, will have a final hardness of 45 Shore A.

This two part compound can be used to make moulded parts, rubber-like protective coatings and more.

Available from AG in 500gm Kits.

Weicon Urethane 45 is the low hardness grade of the Weicon Urethane range which, once cured, will have a final hardness of 45 Shore A. Like the rest of the range, Weicon Urethane 45 is a 2 part liquid polyurethane that cures at room temperature to form a tough, rubber-like material that adheres to a variety of materials (such as metal, concrete, wood, fibreglass and many more).

Because of their low sensitivity to humidity, Weicon Urethanes are also used for creating thin layered coatings that have outstanding tensile and tear strength. They can also be used as flexible coatings in conjunction with Weicon Plastic Metal systems.

Weicon Urethane 45 has a 100:150 mix ratio and a pot life (at 20ºC) of 20 minutes (minimum). This high quality product reaches 50% of final strength after about 12 hours and is fully cured after approximately 24 hours (both based on curing at 20ºC). Once cured, Weicon Urethane 45 is beige in colour, displays good flexibility (elongation at break is 2,400% according to ISO 37) and resists temperatures ranging from -60ºC to 90ºC.

Weicon Urethane 45 is available in 500gm kits as standard with other, special sizes available upon request.

Because of it’s flexibility, ability to be shaped and long lasting performance Weicon Urethane is used in a vast array of different applications. These include:

For Making:

  • Vibration dampeners
  • Assembly jigs
  • Flexible seals
  • Rubber-like prototypes
  • Foundry patterns and forms

For Repairs To:

  • Conveyor belts
  • Solid rubber types
  • Conveyor rollers

For Coatings On:

  • Rollers
  • Centrifuges
  • Polishing Drums
  • Tanks
  • Chutes
  • Funnels
  • Pumps
  • Bulk Containers
  • Dry and wet mixers
  • Cyclones
  • Housings
  • Loading Areas

Depending on the type of surface to which Weicon Urethane 45 is to be applied, some pre-treatment may be required in order to ensure adhesion. For more information on the best method and product for each surface type, as well as addition information on chemical compatibility and technical data for Weicon Urethane please contact your local AG or consult the Weicon Urethanes Brochure available in the downloads sections of this page.

Adhesive Finder Tool

Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool!

Brand